Spring Repair From Garage Door Professionals

Posted by on Jun 4, 2016 in Garage Door Services | Comments Off on Spring Repair From Garage Door Professionals

Garage Door SpringGarage door springs are available in two types. You can have torsion springs or extension springs. Overtime, they’ll inevitably become ruined and you’ll need a garage door spring repair specialist to get it done based on the kind you have placed in your garage.

Torsion springs are the most unsafe kind. They are wound up on a rod over the opening of the door. There are two of them; one on each side of the door‘s center. Often, when one is ruined, the other follows within a short period of time, so it’s generally advised that both should be replaced even if there’s only one of them broken. This saves you from using another garage door spring repair service within a short span of time. It is normally considered dangerous, capable of causing serious injury or even death so it is generally recommended that you should hire a professional to do it for you.

Extension SpringExtension springs, according to professionals, are less risky and easier to repair. This is the type that runs along the upper, right and left door tracks. Still, safety measures should always be observed. Carrying a great amount of tension, they can be stretched to be potentially fatal as they may be installed for a 400 pound door. Though many would try and have attempted to repair this type of garage door spring successfully, it is sensible to determine your own skill relative to the demands that this job would impose. If you have any doubts at all, it would be best to call a dependable garage door spring repair service provider.

When you’re repairing your garage springs, you will want to make sure you have all of the right materials. It can be hard finding the correct parts. There are a lot of companies that only sell to dealers. They do not sell to consumers in order to prevent injuries that may arise when a person is unskilled with garages.

Changing the spring on your garage door offers very real and potentially deadly hazards. It’s true that you can save some costs if you do it yourself but these savings are hardly worth it if you get maimed or worse, killed, because of it. That is not to say that you are not capable of doing the job. The point is not to take unnecessary risks, especially deadly ones, if there are ways to avoid it.

Performing this repair on your own can pose many safety risks, especially if you are a beginner at repairs. The torsion springs can quickly snap back and harm anyone fixing the door. There are a large number of injuries from garage door repair each year. In order to prevent any harm being done to you, an expert garage repair technician should be called.

For Mounted springs raising the garage door off the ground as far is it will go allows the tensions to be taken off the spring, after this occurs the garage must be clamped in that position. Torsion springs must be in the down position before replacing spring. Use the emergency pull rope to help lift the garage door.

Mounted springs may have safety cables and must be disconnected before moving forward. Mounted springs are connected at two points on the garage door, one is connected to the garage door track and the other is connected to the pulley where the garage door cable runs. These two springs must be taken off and replaced by the new springs in the same place. Torsion springs are usually the most dangerous to repair and it is highly recommended to wear eye protection and gloves.

torsion springssThe torsion spring replacement must be in the down position. Make sure a clamp is in place and the door secured tightly, failure to clamp the door completely shut could have devastating safety consequences. The spring is attached to the adjustment collar; a rod must be inserted into the adjustment collar for the purpose of tightening and loosening the spring. Springs must be adjusted at the same rate to assure an equal level of tightening or loosening. Turning the collar in different directions will affect the strength of the force opening the springs.

Even though the garage system will function (if you decide to simply replace one) correctly, you may be running the risk of having the older springs break causing heavier load on the new spring and degrading its life span, leaving you with more headaches and expenses.

In some extreme cases, the door may drop without warning with no safety support, causing damage to the cables, panels, and the opener, not to mention what and who may be underneath it when the spring snaps.

If your garage has a single spring mechanism, we would recommend that you change your system to a double spring. Double torsion spring system helps to hold the garage door in place when one of them breaks. This is a safety feature that is used by most of the modern garage doors. The parts are widely available to quick, and inexpensive replacements.

Save yourself the time and money, get them all replaced at once!

Read More

Weiser Lock

Posted by on May 31, 2016 in Featured Locks, Locksmith Services | Comments Off on Weiser Lock

Weiser LogoDo you want a guarantee for top security in your household? Have you ever wondered what that one solution to the safety of your house or property under a house or structure is? Well look no further than Weiser Locks. A complete solution to safety of material property and of family under one roof. Weiser locks are key innovators in the door ware industry and brings in a pool of expertise that together, results in the fashioning of grade 1 security door locks.

Weiser is recognized for innovation and modern product development that is wrapped up with the latest technological advancement to ensure maximum security of both families and material property. The deadbolt is the part of the lock fitted into a door, which is moved when the key is engaged. Weiser offers various products in this context and is customized into different finishing to suit the customers wants.

Weiser ensures the different fashion of the locks have the following quality that renders it number one security deadbolt product development;

Weiser locks have free spinning guards to deter wrench attacks, anti-pay shields, ant-pick top pins, together with ball bearing embedded cylinder cores for uncompromised security.

WeiserWeiser ensures high quality fashion doorware as this is the number priority of the company to ensure satisfaction of customer need and that is why over the years there has been a revolution of different deadlocks invented to tighten the security of individuals today. Through the changes, the number one drive i.e. provision of quality product and customer satisfaction has never been compromised and left to chance. Weiser has over the years ensured that the deadbolts are fashioned and built in such a way to keep up with the changing lifestyles and fashion trends of the society today.

The basic function of the deadbolts build up offered by the Weiser deadbolts includes;

• 9471/4471: Single Cylinder- which involves deadbolt operated by key outside and thumb turn inside

• 9371: Double Cylinder- Deadbolt operated by key both sides.

Weiser locks provide a wide variety of products and offers different lines of fashion door ware combines with a unique decorator finishes. The most popular line in Weiser locks is the Welcome Home series which features different styles of uniqueness, fashion and finishing which includes customization that allows the customer to align his need to satisfaction. Other lines include;

• Collections by Weiser- the finest line of door ware

• Electronic Keyless Home Access System Product

These solutions are picked depending on taste and preference and for convenience where Electronic Key less Home Access System Product is involved where only a personalized security code is used. Convenience comes in where with the security code one does not have to duplicate keys for kids or workmates. Weiser locks provide this solution and is the home for low cost, fashionable and customized style, wide selection and simple convenience deadbolts.

Weiser1The different lines of fashion from Weiser offers different products which include Element Series, Electronic locks, Smart key, Safe lock, Smart key padlocks. All these have different fashion of products that are packaged under these categories. The Element series provides a line that is flexible with the decorative choice of a customer. It offers a series of products that are customized to march up your house color or decorative decisions. The electronic locks provides a lock that is fitted and connected to a lock that get ids of the keys and one only needs to punch a security code and the door is opened. With the smart key lock you can re-key yourself in seconds. In addition, this only means that this technology provides the flexibility to re-key the locks fast and easy without removing the key from the door. The safe lock package provides line of knobs, levers, deadbolts, and handles sets. The smart key padlocks offer a technology to use the same key to unlock the home door and padlock.

Weiser also provides a smooth finishing and customized deadlocks that are fashioned in the following finishes;

• Antique nickel

• Satin nickel

• Bright brass

• Antique brass

• Bright chrome

• Satin chrome

• Venetian bronze

• Iron black

Weiser is the home for simple convenience, wide selection, unique style and all is got at a fraction of the cost. If you need any type of lock rekeying or repair services, don’t hesitate to call your local locksmith right away!


Read More

The Reliability Of Schlage Locks

Posted by on May 31, 2016 in Featured Locks | Comments Off on The Reliability Of Schlage Locks

Schlage logoThe Schlage lock has been a trusted symbol for almost a century, providing the finest in home and business security. The new keypad locks and deadlocks are no exception, combining high quality metal works with digital technology to provide maximum security. Both keypad and deadbolt lock types can be used for homes and offices. Keypad locks have levers while deadbolts use thumb-turns. The bodies and levers of the locks have different shapes and styles like the Plymouth, Camelot, Addison, Century and Wakefield designs. They also come in bright brass, aged bronze and satin nickel finishes. All of them can be equipped with the new keypad system.

schlage keypadThese locks are programmable by an administrator (owner), who is given a 6-digit programmers key upon purchase. Access to the door is granted upon input of a 4-digit combination. A lock can have up to 19 working 4-digit combinations at a time (from a total of 10,000 possible combinations). After four failed attempts of entering the code, the lock will make warning sounds, and the keypad will be disabled for a few seconds.

Both the lever and deadbolt lock’s hardware have two available types: the Autolock and the Flexlock. The Autolock has no thumb-turn or lever from the inside. The bolt automatically locks after five seconds of being closed. This guarantees that you will never forget to lock an important storage or work room. The Flexlock, on the other hand, allows both manual locking (from the inside) and automatic locking after five seconds. The latter is recommended for the main doors of a home.

Schlage locks offer many advantages and innovations that discount brands don’t. Because of this, Schlage is preferred by many builders, locksmiths and security specialists. Following are some the features that make these door locks stand out.

The tubular design of Schlage locks makes them almost impossible to pick. In addition, the keys have an abnormal shape and bittings on multiple faces of the key. The forged brass construction also makes them resistant to kick-ins and other types of tampering.

Schlage TouchElectronic locks are available for both residential and commercial applications. These allow for keyless entry, multiple user codes, and auto-locking after the door recloses. Schlage pre-programs the electronic locks with random codes so no two locks are the same from the factory, thus adding another layer of security.

All Schlage products are rigorously tested to meet ANSI standards. The locks are long-lasting and easily re-keyed or repaired by a locksmith. While discount brands may malfunction after heavy use, Schlage offers a 3-year warranty on commercial locks and a limited lifetime warranty on residential locks.

The Grade 2, residential locks from Schlage meet the same stringent security requirements as their Grade 1 commercial locks. For example, the solid, one piece design of the deadbolts makes them resistant to attacks with hammers or crow bars. The Grade 1 security also prevents the key cylinder from being knocked out with a screwdriver or chisel.

The security features alone make these locks a top seller. However, innovation with electronic locks, including remote access and control via the Web make Schlage the industry leader in door security. One may think that installing such a complex system would be difficult. However, it is a simple as installing ordinary door knobs and deadbolts. There is no need for extra drill holes since it will fit on regular door preps. Battery replacement is minimal since the alkaline battery (9 volts) will last up to three years.

One of the most amazing features of this cutting edge security system is the Z-Wave “Schlage LiNK” system. This is a wireless network, which allows your keypad and deadlocks to be accessed over the internet. This system uses the Bridge, a secure online application. Through this feature, you can lock, unlock and block 4-digit combinations wherever you are by connecting to the Internet through a phone or a computer. The Bridge also allows you to monitor who is opening your door. Their respective pass-codes are recognized by the computer. You can also open/lock the doors remotely in cases of fire and other emergencies.

Finally, the Z-Wave network for your lock can be enhanced to control house lights. Through this, you can manage the lighting of your house, even if you are miles away. By programming through the Bridge, you an also make your houselights “greet” incoming users differently depending on their individual pass code.

Read More

Trouble With Your Car Ignition?

Posted by on May 29, 2016 in Locksmith Services | Comments Off on Trouble With Your Car Ignition?

Trouble With Your Car Ignition?

So you lost your car keys? Went to your nearest garage to get a new set and they are telling you to come back after a week! Outrageous. Now you have to get your way around in a cab. Sad, right? The more unfortunate discovery you are about to make is that you will return after a week to a greater disappointment. The keys they made do not really work. Yet. In the middle of confusion grabbing your hair as though to pull it out; what have they been doing for a whole week? Newsflash, they too need to access the car to program the keys to work for your car. Ouch!

But you do not have to go through that agonizing encounter every time you misplace your keys. A locksmith might just be what you need to look for, not any locksmith you get when you search for one online but a professional one who will let you in within a wink. Be it your car, house or office, a locksmith could handle that.

Why a locksmith is the best option

You are probably wondering what difference it would make than contacting a local garage? Here are some of the pros of getting a locksmith.

1. Availability factor- It is late at night and you just realized you need to get home and you cannot find your keys. What could you possibly do? No garage is working that late. Simple, get a locksmith. A locksmith can get to you at whatever time in whatever situation and be sure that by the time they leave, your access is granted.

save  money2. Affordability- You might think you got off easy paying a small fee to a small dealer to get you a new set of keys, but that is not the case after all. In the long run, the dealer you chose to trust with your lock did not have the correct skills to get everything in your system in sync. So after a week you are in trouble again. The good news is, locksmiths are fully accountable for their work. Professionals know best than to ask for payments for the same service twice. Their services might end up costing less than what you would have used purchasing a new lock.

3. Warranty- As is with affordability, small dealers will always want to get a little bit more from your pockets so they really do not accept the fault in their work. However, with the locksmith, be sure to get a warranty for their work. If it all goes wrong, they will ref-ix it without extra costs.

locksmith school34. Skill factor- The level of knowledge and technique that a professional locksmith has allows them to maneuver almost any type of lock with great mastery and minimal damage, if any at all. The locksmith also has the skill to inspect and offer ignition switch services in case the situation demands it so you would not have to call a mechanic at the same time.

5. Quality of work- You would let anyone fix your problem because you are desperate, understandable. But what will happen after you realize they broke parts of your lock or damaged your ignition switch simply because they did not have the correct equipment to suit the job? Fortunately, locksmiths will take that worry of your hands. Professional locksmiths are well equipped with the best tools to tackle the latest and most sophisticated technology so you do not have to keep stressing about what will be functional or not after the job is done.

6. Security concerns- You lost your keys but you have no idea who found them. That means whoever found them has access to your property. Locksmiths have the technique to determine whether your locks have already been tampered with and in addition give you advice on whether or not to change your locks and the best lock to pick. Your security is first priority and they, being well aware of that, enhance your security leaving you with no doubts at the back of your mind.

Bottom line

Locksmiths are arguably the best there is of a solution to any lockout situation at whichever location at whatever time. You will be glad you had that number on speed dial, so do not waste the chance to save it now.

Read More

Locksmiths Can Save You Money When You’re Having Ignition Problems

Posted by on May 24, 2016 in Locksmith Services | Comments Off on Locksmiths Can Save You Money When You’re Having Ignition Problems

Locksmiths Can Save You Money When You’re Having Ignition Problems

The ignition system is one of the most important feature in a vehicle. It is used to trigger the engine cycle. However, just like any other car components, there are several ignition problems that prevents the smooth operation of the car. While you can fix some of the problems on your one, most of ignition problems should be attended by a locksmith who save you a lot of time and time.

Common ignition problems

· Key stuck in ignition

When the car key fails to come out of the switch after the engine is turned off, it is often caused by binding in the steering lock column or a damaged locking mechanism.

· Key won’t turn in ignition

Won't startIn some cases, the key may fail to turn when inserted in the ignition switch. This can happen when the front wheels are positioned at an angle against the curb. This puts a load on the steering linkage that is enough to bind the column lock and the ignition switch.

· Failure of the transponder to communicate with PCM

A malfunctioned light indicator means that the computer chip has lost its program and it is no longer functional. This ignition problem can be corrected in either of the following ways:

· Reprogramming the existing key. This depends on the extent of the damage to the chip.

· Reproducing the existing cut the programming a new key.

An experienced locksmith can assess the problem and determine which option to take.

· A Worn Out Key

worn out keyJust like other parts of a vehicle, keys also wear out and when this happens, they lose their effectiveness and may even stop working. A professional locksmith can make a spare key using the key code provided in the manual so that it is cut correctly. Otherwise you may need to replace the ignition switch together with the key.

· Key Is Broken Off Inside the Ignition Switch

If this happens, you should not attempt to remove the key or any other object that may get stuck in the ignition switch. A locksmith will carefully remove the broken piece and make a spare key if you do not have one. However, depending on the damage of the ignition switch and whether or not a spare key can be made, you may have to replace the lock cylinder and the keys.

If your car uses a smart key, a locksmith will program a new key using an advanced computer system.

How a Locksmith will Save You Money When You’re Having Ignition Problems

When faced with any of the above ignition problems, a professional locksmith will fix the problem and you will be back to driving your car. Most locksmiths are mobile, which means that no matter where you are, you can be sure that they will have the key replaced in no time.

When you call a locksmith you should provide all the important information about your car including the year, make so that they come with all the necessary materials, products and equipment to fix the problem. With the advancement in technology, locksmith can make the ignition switch and ignition key replacement from where you are stuck.

Before mobile locksmith, clients had to tow their cars to the car dealership to have the problem fixed which was is costly and inconvenient. Fortunately with mobile locksmith, this is no longer necessary which save you money and time.

Also, unlike when you hire a car dealership where you have to wait for weeks or even months before you get your new car keys, automobile locksmith takes only hours to replace your keys saving you lots of time.

With just a single call, a professional locksmith will come to your location and have the ignition problem fixed. Some locksmith are trained and they have the necessary tools to cut and program the new car keys being used today.

By cutting the unnecessary towing cost, a locksmith will save you hundreds of dollars and since most locksmith provide their services 24/7, you will no longer have to wait until the car dealer shop opens.

Besides saving you money and time, locksmith services are reliable. They are qualified technicians who and they will rarely frustrate. Therefore, you can replace on a locksmith anytime you have a car ignition problem.

Read More

Wrap Your Car Keys In Aluminum Foil??

Posted by on May 21, 2016 in Locksmith Services | Comments Off on Wrap Your Car Keys In Aluminum Foil??

Wrap Your Car Keys In Aluminum Foil??

With evolving technology, things have become much easier to do in ways that far surpass our imagination. Who thought that it would ever be possible to unlock your car without physically turning the key in the lock? However, that has happened and can be positively termed as ordinary in today’s world. But how is this possible? And how secure is such a system? And even more pressing is the need to clarify the absurd notion that you might need to wrap your car keys in aluminum foil. Many vehicle owners are discovering the amazing benefits of wrapping their car keys in aluminum foil. The reasons you should wrap your car keys with aluminum foil are discussed below:

How does key fob technology work?The reason why you need to wrap your car keys in aluminum foil is based on a weakness in the key fob car security system. Key fob technology works by the key fob sending signals to your car to unlock, and with certain car models, to even start your car. But just how is this possible? You see, for a car to unlock there needs to be a match up of codes created by a computer chip in your key fob and those generated by a computer chip in your car. If the two codes fail to match up, the car won’t open. And if they do, then the car is open to anyone makes the two codes match. And anyone means a lot of people besides you. That is the flaw in the system.

What is the risk?

Car hackObviously, having your car unlock and even start itself from a distance is very convenient, but it has its risks. Criminals can steal key fob wireless signals, even for those cars that won’t start unless you are a foot away from them. For such high security cars, these criminal minds will use amplifiers to be able to intercept your signal from even 300 feet away.

After the signal has been intercepted, these thugs then try to determine what code your car will generate so that when the two match up, the car will unlock itself. This takes a master hand in hacking because there could be a billion possible codes generated by your car. When they narrow down these possible combinations to around 200,000, it will then take a computer about half an hour to determine the correct code. This is of course not easy, but thugs show unequaled determination in getting things they are not entitled to. This puts your car at great risk and unless you take action to protect your car by preventing your key fob from sending signals that can so easily be intercepted, it might just cost you your car.

How can you protect your car?

There are several easy things you can do to prevent your key fob from sending signals, all of which work by blocking these signals. These signals cannot pass through a metallic barrier hence encasing your car keys in a metallic case is a great way to secure your car.

The easiest and most convenient way of securing your key fob is by wrapping it in aluminum foil. This is especially practical because aluminum is malleable and cheap. And it is as good a metal as any. Alternatively, you could make a box and line it with aluminum. This should keep the signals contained. However, be sure to wrap those keys correctly otherwise you might just as well leave them unwrapped.

Other alternatives include leaving your car keys in the refrigerator, or the freezer. This will block the signals because the freezers are made of metal. You should however consult with your car dealer to ensure that the refrigerator will not damage your key fob. If you are not comfortable with putting your car keys in the refrigerator, then you could use your microwave oven, provided you do not turn it on.

You could also buy a signal blocking pouch which is made solely for the purpose of keeping your car keys safe, but this might not be pocket friendly to most people.

At the end of the day, it is about keeping your car safe from those malicious thieves and hackers, and if you cannot think of a better way of securing your key fob, grab that aluminum foil and wrap it around those keys.

Read More

Disadvantages Of Using A Dealership For Car Key Replacement

Posted by on May 12, 2016 in Locksmith Services | Comments Off on Disadvantages Of Using A Dealership For Car Key Replacement

Disadvantages Of Using A Dealership For Car Key Replacement

Most car owners never know how much their car keys are worth until they lose them. Besides being baffled by the experience, they often get shocked after discovering that they’ll have to break their banks to have them replaced, not to mention having to waste a great deal of time off the road waiting for their dealership technicians to arrive. The whole experience ends up ruining their plans.


Considering that car keys are small and therefore have the tendency of getting misplaced or lost, it’s important to ensure that you have the right replacement service on site to avoid inconveniences. Car key replacement is a great way to settle all your worries and have you back on the road fast.


Now when it comes to choosing between a local locksmith and your car dealership for car key replacement, it’s highly advisable to go for a reputable locksmith rather than a dealership. This is not to say that dealerships do shoddy work replacing keys. The problem is that they come with a whole lot of disadvantages.


Read on to find out more about why you should never opt for a car dealership when replacing your car keys.


Dealerships Are Too Expensive


expensiveLost means cost- and that’s a fact. Like stated earlier, you’ll never know the worth of your car keys till you replace them and end up spend hundreds of dollars to have them replaced by a dealership. This is one of the biggest setbacks of replacing car keys- you literally have to churn out a huge part of your savings just to have a single key replaced. Most dealerships charges range from $200-$700, which depends on the type of key. A car key with a chip transponder is more expensive that a regular car key.


When you add up the cost of towing (dealerships do not offer onsite services), you end up digging deeper into your pockets. In this case, the best option is to hire the services of a reputable locksmith. A local locksmith will use the same tools and equipment and replacement techniques, but will charge half the price to replace your car keys.

Some Dealerships Do Not Offer Their Services 24/7


24-7Not all dealerships offer car key replacement 24 hours a week. This means that if you get locked out of your car, lose or damage your keys, you’ll have to look for another alternative fast. When that happens during the night, things can get pretty ugly for you. And while some offer emergency services, you can imagine how much time you would waste waiting for a towing vehicle to arrive, and even wait for a few more hours to have your keys replaced.


That’s the bad side of depending on a dealership especially when it comes to car key replacement.


Majority of locksmiths operate on a 24/7 basis. Furthermore, they are mobile, meaning that they arrive onsite fast, even during the night. All you have to do is make one call and have your vehicle back on the road once again.


Slow Response Time


Besides high fees, most dealerships are notorious for slow response time. Some can take hours to respond, send over a towing vehicle, and have you wait a few more hours to have your car key replaced. Most people find them very much inconveniencing. Slow response time from dealerships is one of the main reasons why many car owners are now opting to hire professional locksmiths.


Mobile locksmiths are well-trained to respond to all types of car emergency situations. Be sure to hire a reputable one as he will get you back on the road so your schedule can go on as planned.


Lack of Specialized Services


Most technicians in dealerships specialize in different areas such as engine repairs including others. This simply means that the technician performs car key replacement on rare occasions. This person might not have the necessary experience of a professional locksmith.


In this case, you will want someone who is specialized solely on locksmithing. Most professional locksmiths are specialized in car key replacement including other special fields such as forensic locksmithing. This is a type of training that enables them to identify whether a car key lock has or has not been tampered with. It’s no wonder many people hire such locksmiths as they not only get their car key replaced fast, but they are also assured of their security.


Inconveniences Due to Availability Problems


Availability is crucial when it comes to any type of car service. The problem with many dealerships is that they do not offer their services especially at specific hours, which can be inconveniencing. Others require long delivery times of their services. It’s an experience you wouldn’t want to have, which is why locksmiths are a better option.


Inability to Build Long-Term Relationship


It’s easy to build a relationship lasting for many years with a local locksmith than with a car dealership. Why? This is because chances are that you’ll always find a new technician every time you visit.



Therefore, any time you lose or misplace your car keys don’t hesitate to contact a locksmith. You’ll save money, time, and of course, save yourself from a headache.

Read More